Lohen MINI N18 Crate Forged Engine Build - Config 2
About Lohen Crate Engines
Lohen has used experience and knowledge of the MINI N18 engine to produce a remanufactured performance Crate Engine that strengthens the areas we see as common failure points from our tuning experience. The Lohen N18 Crate Engine is suitable for the MINI Cooper S 2010 - 2014 or MINI JCW 2012 – 2015 and is supplied on an exchange basis.
All engines are re-built in-house by Lohen to OEM or higher specification from donor units that have been checked for tolerances and overall condition. Cylinder bores are checked for ovality and are either honed or bored-and-honed for the right size piston to the correct tolerance. Cranks are checked for size, wear, and damage before they are re-used and, where appropriate.
The Lohen N18 Configuration 2 forged engine uses forged pistons and connecting rods to strengthen the bottom end of the engine. The N18 short block is assembled using new piston rings, Mahle Motorsport bearings throughout as well as ARP bolt and stud kits.
The cylinder heads are checked for straightness, then pressure tested as well as having the cam tolerances checked. The cylinder head in the Configuration 2 N18 engine benefits from the addition of Supertech forged Inconel exhaust valves. These tolerate heat better than the standard OEM valve and the profile is optimised for gas flow. Making the Configuration 2 build better suited to longer and harder driving conditions. The remainder of the cylinder head is assembled with OEM specification valves, springs and retainers.
All re-usable engine components are thoroughly cleaned and inspected and all engines are re-assembled using brand new gaskets, seals, and chains.
Please note - Lohen Crate Engines are supplied as timed-up bare units with a sump, oil pump, and rocker cover. All other bolt-on ancillaries are not included. The engines are therefore shipped dry and require final assembly and fluids prior to installation and starting.
If required, Lohen can supply a fully built engine for an additional charge. We also offer professional in-house installation and running in service at our workshop.
Optional Extras
Crank Shaft Balancing
Balancing the crankshaft is important when building a performance engine. Weight out of balance from the centre point has a direct relationship to engine speed so, for those pushing the MINI engine harder, it is vital the crankshaft is balanced to improve the durability of the engine and, in particular, engine bearings, reducing engine vibration and improving performance.
Surcharge
Exchange unit
Lohen will apply a surcharge to every engine sold unless a donor unit is supplied and it is deemed to be in re-buildable condition.
The engine is built with 10:1 compression ratio pistons. 10.5:1 and 9.5:1 are available by request.
Why do we apply a surcharge?
A surcharge is charged because Lohen reconditions and re-uses certain components, such as the head, crank and the crank case. We do this to reduce costs to customer and components will only be used if they pass strict inspection criteria. Any wearable components are completely replaced in the upgrade process.
How it works
The surcharge applies when a donor engine is not supplied back to Lohen or the condition of the donor engine is deemed by Lohen to be beyond re-buildable (i.e. major damage to head, crank, block bores or external parts of the engine.)
Once the donor engine is received Lohen will assess and measure the unit for tolerances and issue any appropriate refund of the surcharge within 7-10 working days. Should certain components within the donor engine be deemed unusable the surcharge will be only partially refunded. Please contact the sales team for full information.
Parts included:
- Supertech Forge Pistons
- Supertech Piston ring sets
- Supertech connecting rods with ARP bolts
- ARP Head stud kit
- ARP Main bolt kit
- Mahle Big end bearings
- Mahle Main bearings
- OEM specification intake valves
- Supertech forged Inconel exhaust valves
- Supertech single groove valve collets (exhaust side only)
- Supertech bronze valve guides
- OEM specification valve springs
- OEM specification hydraulic lifters
- Timing chain kit
- Lohen gasket kit
- Sump
- Rocker cover
Lohen offers professional, in-house fitting for all products at our workshop in Eccleshall, Staffordshire. Here are the important things you need to know:
Fitting Cost - £1500. Includes installation and running on the dyno.
Fitting Time - 20 hours
Required Additional Items/Services - N18 Engine Installation kit is a comprehensive collection of parts that is suggested when installing a Lohen Crate Engine. Click Here For full details about the Lohen N18 Crate Engine Installation Kit - in summary, this includes 1 x running in oil, 2 x engine oil changes. oil filters, gaskets, coolant, water pump, thermostat, oil pressure sensor, necessary bolts
Lohen Recommends - Inspecting clutch and flywheel operation while the engine and gearbox are out and replacing them as necessary. It's also an ideal time to add a differential for a performance upgrade. Consider the Quaife ATB for road and track day use. The addition of Samco boost and coolant hose kits is advisable for the high-performance engine.
Refunds are available within 7 days after delivery for products that are unused and are in original packaging. Special order goods are non-refundable.
Products returned to us in imperfect, non-resalable condition will not qualify for a refund. Products that are faulty due to the manufacturing process are refundable under the manufacturer's warranty for a limited time specified in the manufacturer's terms and conditions. These do not apply if the product has been fitted incorrectly or misused, motorsport use could further reduce the manufacturer's warranty. I
If an order is cancelled or refunded the buyer is responsible for the return of the goods to such address as directed by the supplier and is at the consumer's sole expense. This does not affect your statutory rights.
| Height (cm) | 100 |
|---|---|
| Length (cm) | 100 |
| Width (cm) | 120 |
| Manufacturer | Lohen |
| Tech Specs | The engine is built with 10:1 compression ratio pistons. 10.5:1 and 9.5:1 are available by request. |
| FAQ | Why do we apply a surcharge? A surcharge is charged because Lohen reconditions and re-uses certain components, such as the head, crank and the crank case. We do this to reduce costs to customer and components will only be used if they pass strict inspection criteria. Any wearable components are completely replaced in the upgrade process. How it works The surcharge applies when a donor engine is not supplied back to Lohen or the condition of the donor engine is deemed by Lohen to be beyond re-buildable (i.e. major damage to head, crank, block bores or external parts of the engine.) Once the donor engine is received Lohen will assess and measure the unit for tolerances and issue any appropriate refund of the surcharge within 7-10 working days. Should certain components within the donor engine be deemed unusable the surcharge will be only partially refunded. Please contact the sales team for full information. |
| Whats in the box | Parts included:
|
| Fitting Details | Lohen offers professional, in-house fitting for all products at our workshop in Eccleshall, Staffordshire. Here are the important things you need to know: Fitting Cost - £1500. Includes installation and running on the dyno. Fitting Time - 20 hours Required Additional Items/Services - N18 Engine Installation kit is a comprehensive collection of parts that is suggested when installing a Lohen Crate Engine. Click Here For full details about the Lohen N18 Crate Engine Installation Kit - in summary, this includes 1 x running in oil, 2 x engine oil changes. oil filters, gaskets, coolant, water pump, thermostat, oil pressure sensor, necessary bolts Lohen Recommends - Inspecting clutch and flywheel operation while the engine and gearbox are out and replacing them as necessary. It's also an ideal time to add a differential for a performance upgrade. Consider the Quaife ATB for road and track day use. The addition of Samco boost and coolant hose kits is advisable for the high-performance engine. |
| Returns & Refunds | Refunds are available within 7 days after delivery for products that are unused and are in original packaging. Special order goods are non-refundable. Products returned to us in imperfect, non-resalable condition will not qualify for a refund. Products that are faulty due to the manufacturing process are refundable under the manufacturer's warranty for a limited time specified in the manufacturer's terms and conditions. These do not apply if the product has been fitted incorrectly or misused, motorsport use could further reduce the manufacturer's warranty. I If an order is cancelled or refunded the buyer is responsible for the return of the goods to such address as directed by the supplier and is at the consumer's sole expense. This does not affect your statutory rights. |
