COVID-19 Update - Online orders still being dispatched - Worldwide shipping available

Lohen Engine Assembly & Install Kit N14

SKU
SKU 1802
£1,300.00 £1,083.33

The Lohen Engine and Installation Kit includes all items that Lohen have learned are the recommended and necessary components to change when removing, refreshing, rebuilding and re-installing the Generation 2 MINI Cooper S and JCW N14 engine. The kit refreshes engine gaskets, timing components, bolts, bearing a more. See the What's In The Box tab for a full list of parts. The Engine Assembly and Install N14 Kit utilises a mix of genuine MINI and Ajusa aftermarket parts to give you the best combination of quality and value. 

The N14 Engine Assembly and Installation Kit is ideal for using at home or as part of the Lohen Turn Key Engine Building labour. 

Why would I rebuild an engine rather than replacing it?

There are generally 2 key reasons Lohen's customers want or need to rebuild the N14 MINI engine; maintenance to repair a broken engine or strengthening and forging the engine for increased power. 

In the case of engine failure, the best way forward often depends on the mode of failure and damage to the engine. Re-building an engine can be a suitable way forward as it gives peace of mind and knowledge that the engine is fresh. 

If the reason for engine building is performance based, the Lohen Engine Assembly and Installation Kit is an ideal starting point for installing performance hardware. 

This kit can be purchased to fit at home or by your chosen workshop or used as part of the Lohen Turn Key engine building service. 


Suitable for the MINI N14 engine found in the following models:
MINI Cooper S R56 Hatch, R55 Clubman, R57 Convertible, R58 Coupe, R59 Roadster 2007 - 2010 
MINI JCW R56 Hatch, R55 Clubman, R57 Convertible, R58 Coupe, R59 Roadster 2007 - 2012


 


Ajusa N14 Full Gasket Kit containing:
Standard size head gasket
Exhaust gasket
Inlet manifold gasket
Valve stem seals
Oil filter housing gasket set
Rocker cover gasket

Ajusa Turbo Fitting Kit containing:
1 x Turbo to manifold gasket
1 x Downpipe gasket
6 x Turbo studs
6 x Turbo Hex nuts
4 x Turbo oil feed pipe washer

1 x Ajusa turbo oil feed pipe
1 x Ajusa head bolt set
1 x Mahle Motorsport big end bearing set
1 x Mahle Motorsport main bearing set
1 x Mahle oil filter
1 x K&N oil filter
4 x MINI piston ring set
1 x MINI timing chain
1 x MINI timing chain tensioner
1 x MINI timing chain guide rail - large
1 x MINI timing chain guide rail - small
1 x MINI timing slide rail
1 x MINI timing sprocket
2 x MINI output shaft seal
1 x MINI oil pump chain
6 x MINI flywheel bolts
1 x MINI oil filter housing gasket
1 x MINI downpipe clamp
2 x MINI driveshaft nut
2 x MINI guide washer
1 x MINI inlet cam bolt 
1 x MINI vacuum pump o-ring
1 x MINI cooling system pipe clip
4 x Turbo water bolt washer
3 x Turbo oil feed pipe bolt washer 
2 x Millers Gearbox oil 1L 75W90 (Unable to ship due to hazardous condition.)


Lohen offers in-house fitting for all products at our workshop in Eccleshall, Staffordshire, ST21 6JL. Here are the important things you need to know:

Fitting Cost - Installation labour £1299. Please call us to discuss your requirements, 01785 85 99 99. 

Fitting Time - From 3 days

Required Additional Items/Services - Block honing will be required to accommodate the forged piston regardless of size. 

Lohen Recommends - Discussing your options with our team to ensure that you get the most from your performance engine build. 


Returns and Refund Policy - Refunds are available within 7 days after delivery for products that are unused and are in original packaging. Special order goods are non-refundable. Products that are damaged in transit to or from the customer can be refunded up to 14 days after the product has been delivered. Products returned to us in imperfect, non-resalable condition will not qualify for refund. Products that are faulty due to manufacturing process are refundable under the manufacturers' warranty for a limited time specified in the manufacturer's terms and conditions. These do not apply if the product has been fitted incorrectly or misused, motorsport use could further reduce the manufacturer's warranty. If an order is cancelled or refunded the buyer is responsible for the return of the goods to such address as directed by the supplier and is at the consumer's sole expense. This does not affect your statutory rights.

More Information
Tech Specs

Suitable for the MINI N14 engine found in the following models:
MINI Cooper S R56 Hatch, R55 Clubman, R57 Convertible, R58 Coupe, R59 Roadster 2007 - 2010 
MINI JCW R56 Hatch, R55 Clubman, R57 Convertible, R58 Coupe, R59 Roadster 2007 - 2012

FAQ

 

Whats in the box

Ajusa N14 Full Gasket Kit containing:
Standard size head gasket
Exhaust gasket
Inlet manifold gasket
Valve stem seals
Oil filter housing gasket set
Rocker cover gasket

Ajusa Turbo Fitting Kit containing:
1 x Turbo to manifold gasket
1 x Downpipe gasket
6 x Turbo studs
6 x Turbo Hex nuts
4 x Turbo oil feed pipe washer

1 x Ajusa turbo oil feed pipe
1 x Ajusa head bolt set
1 x Mahle Motorsport big end bearing set
1 x Mahle Motorsport main bearing set
1 x Mahle oil filter
1 x K&N oil filter
4 x MINI piston ring set
1 x MINI timing chain
1 x MINI timing chain tensioner
1 x MINI timing chain guide rail - large
1 x MINI timing chain guide rail - small
1 x MINI timing slide rail
1 x MINI timing sprocket
2 x MINI output shaft seal
1 x MINI oil pump chain
6 x MINI flywheel bolts
1 x MINI oil filter housing gasket
1 x MINI downpipe clamp
2 x MINI driveshaft nut
2 x MINI guide washer
1 x MINI inlet cam bolt 
1 x MINI vacuum pump o-ring
1 x MINI cooling system pipe clip
4 x Turbo water bolt washer
3 x Turbo oil feed pipe bolt washer 
2 x Millers Gearbox oil 1L 75W90 (Unable to ship due to hazardous condition.)

Fitting Details

Lohen offers in-house fitting for all products at our workshop in Eccleshall, Staffordshire, ST21 6JL. Here are the important things you need to know:

Fitting Cost - Installation labour £1299. Please call us to discuss your requirements, 01785 85 99 99. 

Fitting Time - From 3 days

Required Additional Items/Services - Block honing will be required to accommodate the forged piston regardless of size. 

Lohen Recommends - Discussing your options with our team to ensure that you get the most from your performance engine build. 

Returns & Refunds

Returns and Refund Policy - Refunds are available within 7 days after delivery for products that are unused and are in original packaging. Special order goods are non-refundable. Products that are damaged in transit to or from the customer can be refunded up to 14 days after the product has been delivered. Products returned to us in imperfect, non-resalable condition will not qualify for refund. Products that are faulty due to manufacturing process are refundable under the manufacturers' warranty for a limited time specified in the manufacturer's terms and conditions. These do not apply if the product has been fitted incorrectly or misused, motorsport use could further reduce the manufacturer's warranty. If an order is cancelled or refunded the buyer is responsible for the return of the goods to such address as directed by the supplier and is at the consumer's sole expense. This does not affect your statutory rights.

Manufacturer Lohen Packages
Write Your Own Review
You're reviewing:Lohen Engine Assembly & Install Kit N14
Your Rating

Get the latest news and events direct