COVID-19 updates - We are open - Worldwide shipping available.

Lohen MINI N14 Crate Forged Engine Build - Config 1A

SKU
LOCEN14-1A
£4,200.00 £3,500.00
The Lohen Crate Engine Configuration 1 is built in-house at Lohen and benefits from uprated pistons, bearings and bolts. Call us for booking enquiries: 01785 859999

The Lohen forged N14 MINI engine is suitable for the Cooper S 2007 – 2010 or JCW 2007 – 2012. Lohen have used experience and knowledge of the N14 engine to produce a crate engine that strengthens the areas that we see as common failure points. Lohen’s entry offering for a crate engine is high quality. Lohen engines are built with precision and stronger forged pistons and forged Inconel exhaust valves. The Specification 1A engine is ideal for those who are running a standard or lightly tuned MINI and replace it with an engine that addresses two of the common failure points. All of our engines are measured and tolerance checked.

To accommodate the forged pistons the engine block is precision bored this includes a tolerance specific to the forged piston. Piston rings are then machined to the correct tolerance for each cylinder. Lohen build the N14 MINI engine with Supertech forged pistons using the same compression ratios as either the standard Cooper S or JCW. The forged pistons are stronger than the standard piston found in the N14 engine so reduce the chance of piston failure. ARP connecting rod bolts, head bolts and main studs replace the stand items to further strengthen the engine. Mahle Motorsport main and big end bearings are high quality items used to further improve the durability of the Lohen Specification 1A crate engine.

The Supertech Inconel exhaust valves are added to Lohen Crate Engine 1A, this is to add durability to the engine and deal with the high and sustained exhaust gas temperatures associated with tuned or MINIs driven with sustained enthusiasm. This engine is best suited to MINI’s producing between 165 – 265 BHP. The presence of the forged pistons and uprated bolts mean the engines can withstand greater forces the encounter through higher boost levels of a tuned MINI. New timing chains and gaskets are used to rebuild the engine so you can be sure that the engine runs smoothly and without engine oil leaks. Lohen Crate engines are shipped dry and require fluids prior to starting.


 

  • Supertech N14 Pistons 10:1 compression ratio
  • Supertech N14 Piston ring sets
  • Supertech Exhaust Valves
  • ARP Head stud kit
  • ARP Main bolt kit
  • Mahle Big end bearings
  • Mahle Main bearings
  • MINI intake valves
  • MINI exhaust valves
  • MINI valve springs
  • Timing chain kit
  • Lohen gasket kit

Lohen offers professional, in-house fitting for all products at our workshop in Eccleshall, Staffordshire. Here are the important things you need to know:

Fitting Cost - £1330

a Time - 20 hours

Required Additional Items/Services - Oil, oil filters, gaskets, coolant

Lohen Recommends - Using a Millers CFS 10W50 oil for use with Lohen Crate Engines. 

Refunds are available within 7 days after delivery for products that are unused and are in original packaging. Special order goods are non-refundable. Products that are damaged in transit to or from the customer can be refunded up to 14 days after the product has been delivered. Products returned to us in imperfect, non-resalable condition will not qualify for refund. Products that are faulty due to the manufacturing process are refundable under the manufacturers' warranty for a limited time specified in the manufacturer's terms and conditions. These do not apply if the product has been fitted incorrectly or misused, motorsport use could further reduce the manufacturer's warranty. If an order is cancelled or refunded the buyer is responsible for the return of the goods to such address as directed by the supplier and is at the consumer's sole expense. This does not affect your statutory rights.

More Information
Height (cm) 1000
Length (cm) 1000
Width (cm) 1000
Manufacturer Lohen
FAQ

 

Whats in the box
  • Supertech N14 Pistons 10:1 compression ratio
  • Supertech N14 Piston ring sets
  • Supertech Exhaust Valves
  • ARP Head stud kit
  • ARP Main bolt kit
  • Mahle Big end bearings
  • Mahle Main bearings
  • MINI intake valves
  • MINI exhaust valves
  • MINI valve springs
  • Timing chain kit
  • Lohen gasket kit
Fitting Details

Lohen offers professional, in-house fitting for all products at our workshop in Eccleshall, Staffordshire. Here are the important things you need to know:

Fitting Cost - £1330

a Time - 20 hours

Required Additional Items/Services - Oil, oil filters, gaskets, coolant

Lohen Recommends - Using a Millers CFS 10W50 oil for use with Lohen Crate Engines. 

Returns & Refunds

Refunds are available within 7 days after delivery for products that are unused and are in original packaging. Special order goods are non-refundable. Products that are damaged in transit to or from the customer can be refunded up to 14 days after the product has been delivered. Products returned to us in imperfect, non-resalable condition will not qualify for refund. Products that are faulty due to the manufacturing process are refundable under the manufacturers' warranty for a limited time specified in the manufacturer's terms and conditions. These do not apply if the product has been fitted incorrectly or misused, motorsport use could further reduce the manufacturer's warranty. If an order is cancelled or refunded the buyer is responsible for the return of the goods to such address as directed by the supplier and is at the consumer's sole expense. This does not affect your statutory rights.

Write Your Own Review
You're reviewing:Lohen MINI N14 Crate Forged Engine Build - Config 1A
Your Rating

Get the latest news and events direct