Mocal Oil Cooler Kit
Mocal have been manufacturing oil coolers since 1965, and are the single most common oil cooler system used on racing cars worldwide. The secret of Mocal’s success – insistence on the highest standards of build quality combined with a rigorous inspection system.
The coolers are constructed of aluminium pressed plates forming the oil ways and end tanks, the oil ways contain turbulators which help achieve maximum heat dissipation, and provide structural integrity to the cooler under pressure. The design is beautifully simple, but restricted to a 2” thickness and a limited amount of lengths.
Maximum working pressure of the coolers is 10bar/150psi, however each cooler is tested to 11.5bar/170psi, which is more than adequate for most but arduous applications. A MINI revving at 7000 rpm runs at 5bar maximum oil pressure and thus will stay well within the working limits of the oil cooler.
The kit contains a top quality textile braided elastomer (a type of black rubber) covered hose in 1/2” bore, with swaged on fittings (BSP thread). If you choose braided hoses – then the hose will have a stainless steel braid covering which enhances appearance and gives extra resistance to abrasion.
To complete the kit a take off plate, which replaces the standard water-to-oil heat exchanger, and a pair of universal mounting brackets are included. The latter can be bent & cut to allow for various locations of the oil cooler (we recommend – in the lower radiator area under the aluminium cross member).
- Improved Cooling
- Mocal Oil cooler
- Take off plate
- 2 rubber or braided hoses
- Universal mounting brackets
Lohen offers in-house fitting for all producst at our workshop in Eccleshall, Staffordshire. Here are the important things you need to know:
Fitting Cost - £175
Fitting Time - 3 Hours
Required Additional Items/Services - No additional items or services needed.
Lohen Recommends - No items to recommend.
Returns and Refund Policy - Refunds are available within 7 days after delivery for products that are unused and are in original packaging. Special order goods are non-refundable. Products that are damaged in transit to or from the customer can be refunded up to 14 days after the product has been delivered. Products returned to us in imperfect, non-resalable condition will not qualify for refund. Products that are faulty due to manufacturing process are refundable under the manufacturers' warranty for a limited time specified in the manufacturer's terms and conditions. These do not apply if the product has been fitted incorrectly or mis-used, motorsport use could further reduce the manufacturer's warranty. If an order is cancelled or refunded the buyer is responsible for the return of the goods to such address as directed by the supplier and is at the consumer's sole expense. This does not affect your statutory rights.