Lohen Head Swap Kit
Swapping for a performance head on your MINI can give you some good performance gains as long as it is fitted properly and the engine is re-assembled correctly. If you have been unfortunate enough to experience a head gasket failure you will also need to remove your head and this kit would be perfect for aiding the refitting process. We have put together a selection of genuine MINI items that will allow you to install a head and get you back on the road as smoothly possible.
By using all new gaskets on the inlet and exhaust manifolds, head and bypass valve as well as new O-rings you are ensuring that you will have no oil or air leaks from the head. New rocker cover bolts will make sure that there is a good seal between the cover, gasket and head and a new camshaft bolt is always recommended when swapping heads. We also supply new head bolts which are essential when you are fitting your head as well as a fresh oil filter.
- Fix Oil Leaks
- New Oil Filter
- 1 x MINI Head Gasket
- 1 x MINI Inlet Manifold Gasket
- 1 x MINI Exhaust Manifold Gasket
- 10 x MINI Large Head Bolt
- 2 x MINI Small Head Bolt
- 1 x MINI Oil Filter
- 1 x MINI Rocker Cover Gasket
- 1 x MINI Camshaft Bolt
- 4 x MINI Long Rocker Cover Bolt
- 8 x MINI Short Rocker Cover Bolt
- 1 x MINI Camshaft Position Sensor O-Ring
- 2 x MINI Screw Plug O-Ring
- 1 x Bypass Valve to Air Horn Gasket
Lohen offers in-house fitting for all products at our workshop in Eccleshall, Staffordshire. Here are the most important things you need to know:
Fitting Cost - £90
Fitting Time - 1.5 Hours
Required Additional Items/Services - No additional items or services needed
Lohen Recommends - No items to recommend for this product.
Returns and Refund Policy - Refunds are available within 7 days after delivery for products that are unused and are in original packaging. Special order goods are non-refundable. Products that are damaged in transit to or from the customer can be refunded up to 14 days after the product has been delivered. Products returned to us in imperfect, non-resalable condition will not qualify for refund. Products that are faulty due to manufacturing process are refundable under the manufacturers' warranty for a limited time specified in the manufacturer's terms and conditions. These do not apply if the product has been fitted incorrectly or mis-used, motorsport use could further reduce the manufacturer's warranty. If an order is cancelled or refunded the buyer is responsible for the return of the goods to such address as directed by the supplier and is at the consumer's sole expense. This does not affect your statutory rights.