AP Racing 600 Brake Fluid - Track & Race Use
This product is Polyalkalene-based and is intended for competition use only. For road-going brake fluid, please see our AP Racing 5.1 DOT Fluid.
AP Racing's 600 fluid has a dry boiling point exceeding 300 degrees C and has been developed for racing applications where high temperatures are being experienced e.g. when using carbon brake discs and the ultimate in brake fluid performance is required.
It should be noted that before using AP Racing 600 brake fluid, any existing brake fluid should be drained completely from the brake system. The system should then be thorougly purged with new 600 and can be filled completely with new 600.
You will need at least 2 bottles of this fluid to service a MINI.This product is Polyalkalene-based and is intended for competition use only. For road-going fluid, please see our AP Racing 5.1 DOT Fluid.
New Dry 312 degrees C
- Typical Boiling Points
'Wet' E.R. 204 degrees C
What is this brake fluid suitable for?
This is suitable for track use only as it takes on water. It has a high boiling point exceeding 300 degrees. It has been specifically designed for racing apllications when they experiance high temperature.
- 1 x bottle of AP Racing 600 Fluid
Lohen offers in-house fitting for all products at our workshop in Eccleshall, Staffordshire. Here are the important things you need to know:
Fitting Cost - Brake Fluid Change £60 (not including fluid)
Fitting Time - 1 Hour
Required Additional Items/Services - No additional items or services needed.
Lohen Recommends - Be sure to purchase the suitable brake fluid for your car.
Returns and Refund Policy - Refunds are available within 7 days after delivery for products that are unused and are in original packaging. Special order goods are non-refundable. Products that are damaged in transit to or from the customer can be refunded up to 14 days after the product has been delivered. Products returned to us in imperfect, non-resalable condition will not qualify for refund. Products that are faulty due to manufacturing process are refundable under the manufacturers' warranty for a limited time specified in the manufacturer's terms and conditions. These do not apply if the product has been fitted incorrectly or mis-used, motorsport use could further reduce the manufacturer's warranty. If an order is cancelled or refunded the buyer is responsible for the return of the goods to such address as directed by the supplier and is at the consumer's sole expense. This does not affect your statutory rights.