Helix Autosport Performance 4 Paddle Clutch & Single Mass Flywheel Kit


The Helix Autosport Performance 4 paddle cerametallic clutch and lightened single mass flywheel kit is is ideally suited to generation 2 Cooper S and JCW MINIs with a track focus and running high levels of torque, perhaps where the ECU has been tuned or remapped..
Manufacturer: Helix Autosport


The kit uses a heavy duty pressure plate coupled with a high performance 4 paddle cerametallic drive plate material to deliver a torque capacity of 404 Nm for the clutch and single mass wheel kit.
Despite the heavy duty pressure plate the clutch maintains a usable clutch pedal feel. This is marginally heavier the stock clutch.

The 4 paddle cerametallic drive plate produces a snappy gear change to maximise time on the throttle making it ideal for track use. 

The single mass flywheel is lightened over standard allowing for performance improvements. The reduction in rotating mass allows for improved acceleration and pick up. The Helix Autosport single mass flywheel for the MINI has a Lohen measured weight of 6.2 Kg this is considerably lighter than the MINI dual mass flywheel which has a Lohen measure weight of 12.6 Kg.

Helix Drive plates are interchangeable between the Helix Autosport Organic, 6 paddle and 4 paddles clutch and flywheel kits allowing MINI owners to change the clutch torque rating without having to replace the whole unit making it easier and more cost effective to upgrade the car in stages.

The Helix Autosport Performance 4 paddle clutch will be noisy in operation. This is particular evident on take off or when crawling through traffic. The 4 paddle kit is ideal for track use, it produce crisp and direct gear changes to maximise power delivery. 

Tech Spec

Rated to deliver drive up to 404 Nm
Flywheel weight 6.2 Kg



What's In The Box

1 x Helix Autosport single mass flywheel
1 x Helix Autosport 4 paddle cerametallic sprung drive plate
1 x Helix Autosport Heavy duty pressure plate
1 x Helix Autosport heavy duty release bearing

Fitting Details

Lohen offers professional, in-house fitting for all products at our workshop in Eccleshall, Staffordshire, ST21 6JL. Here are the important things you need to know:

Fitting Cost - £360

Fitting Time - 78 Hours

Required Additional Items/Services - .

Lohen Recommends - Fitting rear crank seal and installing Powerflex front wish bone rear bushes during this work as these are areas that are costly to service should they fail. The Powerflex polyurethane bushes also improve the handling of the MINI if the original rubber based bushes have begun to soften. We would also suggest taking the opportunity to install a Quaife differential to allow for maximum power delivery and handling improvements on tuned MINI’s.

Returns & Refunds

Refunds are available within 7 days after delivery for products that are unused and are in original packaging. Special order goods are non-refundable. Products that are damaged in transit to or from the customer can be refunded up to 14 days after the product has been delivered. Products returned to us in imperfect, non-resalable condition will not qualify for refund. Products that are faulty due to manufacturing process are refundable under the manufacturers' warranty for a limited time specified in the manufacturer's terms and conditions. These do not apply if the product has been fitted incorrectly or misused, motorsport use could further reduce the manufacturer's warranty. If an order is cancelled or refunded the buyer is responsible for the return of the goods to such address as directed by the supplier and is at the consumer's sole expense. This does not affect your statutory rights.


There are yet no reviews for this product.